How To Install Oak Veneer Sheets

Download Article

Download Article

Veneering wood was in one case idea of equally a painstaking and time-consuming job, but it has come a long way recently. There are at present many varieties of veneer, with applications that have evolved for convenience. These days, just near anyone can larn how to veneer wood. And every bit you lot'll discover here, contact cement is considered one of the easiest and longest-lasting methods.

1. 1

   Choose a rotary vs sliced veneer. Rotary veneers are what plywood is made out of and mostly produce an appearance that many people don't like. Still, they can also come up in larger sheets and may be the only option for very large projects. Sliced veneer looks like normal lumber, and allows you to get actually beautiful grain detail.

2. 2

   Choose a random or volume-matched veneer. You tin get random sets of veneers, or yous can get book-matched sets. In volume matched sets, you lot get the pieces that were cut one next to the other, so that the grain patterns match upwards. This can be used to create cute designs. However, unmatched sets may await more "natural".

   Advertising

3. 3

   Choose your application method. You tin can get veneer sheets that have adhesive already applied to one side. These are the easiest to identify. If y'all get regular veneer, however, you'll need to use the awarding method discussed in the other section.

   • These are generally applied only like a sticker, but you should read the included instructions to see if that particular manufacturer requires special steps.

4. 4

   Choose your substrate. Veneers are attached to a substrate (or base material). Ordinarily this is either some other wood (if yous are veneering, for example, panels on doors or cabinets) or it is a cheaper cloth altogether, such as MDF. These homo-made materials are probably the best selection, since they usually allow you to save the most money.

5. 5

   Choose a glue. You can utilise yellow or carpenter's mucilage if you want to. If you live in a very dry environment with little humidity, these will work perfectly fine. If y'all live in a humid environs, all the same, these glues can crusade your veneers to wander. Information technology'south better to utilize a proper veneering gum.

   • Many other methods of veneering use these glues. Be wary of those methods, especially if you alive in a boiling surroundings.

   Ad

1. 1

   Cut your veneer to size. Cut the veneer to the size you want, making sure to leave as little overhang equally possible. Whatever more than one/four" overhang and you'll likely cleft the veneer.

2. two

   Use contact cement to the substrate. Using a very short nap roller, gyre the contact cement onto the area of the substrate that will be covered by a unmarried panel of the veneer. Coil in one direction and and then the other, just like you would a wall, in gild to guarantee 100% coverage of the substrate surface.

3. 3

   Apply contact cement to the veneer. Go through the aforementioned motions to apply contact cement to the veneer, likewise making sure to get 100% coverage. In that location should not be whatever dry spots.

4. 4

   Allow for tack fourth dimension. Allow but enough time for the agglutinative to dry slightly. It should feel possibly somewhat tacky to the touch, only not be able to catch hold of a sheet of paper or the hairs of your arm. This is ordinarily after v-x minutes.

5. 5

   Place a canvass of wax paper. Place a canvass of wax or parchment paper on your substrate. This will get between the substrate and the veneer while you marshal the veneer, to help you become information technology as directly as possible without joining the pieces before they're ready.

6. 6

   Marshal the veneer. Line up the corners of the veneer and the substrate and go it into place. So showtime to press it down so that the two glued sides touch, removing the paper as you go.

7. seven

   Smoothen out the slice. Using your hand, smooth out the piece of veneer, starting from the center and moving out toward the edges. Employ firm force per unit area to ensure that full contact is made. Adjacent, smoothen it once again using a flat tool like a putty knife or a carpet stair tool. Smooth it in 1 direction and then the other, just like you applies the agglutinative.

   • Do non utilize a tool like a roller, every bit this applies weak and uneven pressure.

8. 8

   Trim the edges. Trim the edges using a utility knife and and so sand the edges using high dust sandpaper (180 to 220).

   Advertizement

Add New Question

• Question

  I don't understand how you remove the waxed newspaper?

  

  Jack Pierce_26

  Community Answer

  For waxed paper, you will have to scratch it off. Or if there is a slice missing, scratch the veneer parts from there, since it is piece of cake to do.

Ask a Question

200 characters left

Include your email address to go a message when this question is answered.

Submit

Advertisement

Video

• One method to verify the proper placement is to cut a piece of waxed paper the same size of the veneer, beingness sure to allow some excess on ane side. Then put it between the substrate and the veneer. This will allow you lot to position both pieces, to your satisfaction before sliding the waxed paper out to activate the adhesive.

• You lot tin eliminate whatsoever leftover bubbles by making tiny slits in the veneer, using a utility knife. Make the cuts in the direction of the grain.

Thanks for submitting a tip for review!

Advertizement

• When using contact cement, be absolutely sure about the placement of the veneer. Contact cement is impossible to conform once it'south made contact with the surface.

Advertisement

About This Article

Article Summary X

To veneer wood, start by cut the veneer to size leaving as little overhang equally possible. Next, roll contact cement on both the substrate's surface and the veneer with a short nap roller and wait well-nigh five-ten minutes until the agglutinative feels tacky to the touch. So, position the veneer on top of the substrate, lining them up perfectly, and press down gently. Finally, smooth out the slice of veneer with your hand, trim the edges with a utility knife, and sand the edges using loftier-grit sandpaper! For tips on using wax newspaper to help yous perfectly marshal the veneer and substrate, read on!

Did this summary help you?

Thank you to all authors for creating a page that has been read 84,758 times.

Did this article assist yous?

Source: https://www.wikihow.com/Veneer-Wood

Posted by: watsoneaser1983.blogspot.com

Share this post